Separate names with a comma.
Signup today and join in on the fun!
I believe the PD for the pulley is 0.7517", so the circumference is 2.361" Rev/inch = 0.423
Try dividing 1" by the calculated mean circumference. Pretty sure that will give you rev/inch
Hi all, FYI, Goodluckbuy sell Aluminium spindle clamps, I've ordered a 65mm item which I will try to adapt onto my machine. They offer a few to...
I have no complaints with their service, ordering is simple. Ordered 6 Stepper motors (2804's & 1504's) on Thursday 8MAY and TNT attempted delivery...
I can supply 6mm Aluminium Waterjet cut Gantry plates, I also made the triangular frame connectors. They are $85/set plus postage. They aren't as...
Picked up my batch of Gantry plates from the Waterjet cutter today. All looks good, I verified these parts on the 20x80 I have and the eccentrics...
It looks like airmail charge to Italy would be $50 + $7.25 insurance ($125 coverage) There is a tracked option that is available for an additional...
I can supply Waterjet cut Gantry plates and frame joiners. Check my thread in the forums. There are at least a couple of others supplying machined...
I should have these plates sometime next week.
I have trialed the 2080 offcut in the first set of plates I had made and they fit up very well. Less than half the adjustment range in the eccentric...
Mark, are you going to be offering the Z-Axis threaded rod and nut block in the store?
The 6mm Aluminium plates I have weighs ~568g each.
I found an online calculator here, http://www.engineeringtoolbox.com/cantilever-beams-d_1848.html. Ran some numbers to get some generic deflection...
I haven't done the sums but a thin steel plate may deflect more under cutting load than a thicker G10/Aluminium section. I'll pull out the old...
Description taken directly from 3DS site "A free, standalone, professional-grade 2D CAD product for professional CAD users, students and educators...
Hi SlyClockWerkz, the DXF I posted is identical to the one posted in the files tab of the Ox build thread. The only change I made was to erase the OX...
Thanks for offering to do that, perhaps if I find this set of parts is too loose I'll update the DXF and send it to you. I will know within the next...
No problems, I'm not going to ask for any money until there is enough numbers to warrant ordering the parts though. I need 3-4 sets for friends and...
I thought I read somewhere that there may not be enough adjustment in the eccentrics to That's correct, Australian price would be $85+$13.40.
Hi Franco, that's great. AUD$120 will cover the parts and basic postage, insurance would be $8.5 extra ($150 coverage). I'm looking at using this...
