Large 1500x1000 Laser V

I am building a Laser cutter based off Robert Hummel's Laser V design.

Qty	Part Name	Part Link	Comments
3	Nema 17 Stepper	http://openbuildspartstore.com/nema-17-stepper-motor/ Link	Not all Nema 17 are the same make sure you don't get too low torque oz model for your project.
1	Black V-Slot 20 x 40 x 1000mm	http://openbuildspartstore.com/black-v-slot-20-x-40mm/ Link	Does not have to be black. 1000mm length.
2	Black V-Slot 20 x 40 x 1500mm	http://openbuildspartstore.com/black-v-slot-20-x-40mm/ Link	Does not have to be black. 1500mm length.
12	Mini V Wheel Kit	http://openbuildspartstore.com/mini-v-wheel-kit/ Link
3	Motor Mount Plate	http://openbuildspartstore.com/motor-mount-plate/ Link
3	Mini V Plate	http://openbuildspartstore.com/mini-v-plate/ Link
15	GT2 (2mm) Timing Belt	http://openbuildspartstore.com/gt2-2mm-timing-belt/ Link
1	LD2X Laser Driver Board	http://openbuildspartstore.com/ld2x-laser-driver-board/ Link
1	Slot Cover / Panel Holder	http://openbuildspartstore.com/slot-cover-panel-holder/ Link
1	Tee Nuts (25 Pack)	http://openbuildspartstore.com/tee-nuts-25-pack/ Link
4	Shapeoko End Plate	https://www.inventables.com/technologies/shapeoko-end-plate Link
5	Eccentric Spacers	http://openbuildspartstore.com/eccentric-spacers/ Link
1	Low Profile Screws M5 - 8mm/25 Pcs	http://openbuildspartstore.com/low-profile-screws-m5/ Link
1	Low Profile Screws M5 - 35mm/10 Pcs	http://openbuildspartstore.com/low-profile-screws-m5/ Link
3	GT2 (2mm) Aluminum Timing Pulley - 20	http://openbuildspartstore.com/gt2-2mm-aluminum-timing-pulle... Link