Proteus

Parts List
6 Motor Mount Plates
6 V Slot Gantry Plates
6 Nema 17 (includes one for extruder)
16 long motor standoffs
8 3 hole 90 brackets
5 double tree nuts
5 MXL Belt Pulleys
12 ft MXL Belt (9 ft minimum but I like to have extra )
28 V Slot wheels (8 extra for a possible needed mod)
12 Cast-90 degree Corner
4 3 Hole Joining Strip
100 Low Profile Screws 40mm (just a complete guess plus I have some standard capped laying around)
100 Low Profile Screws 10mm (Also a complete guess)
200 nuts and washers to go with above screws
2 20x80 V Slot 0.5m
2 20x60 V Slot 0.5m
2 20x60 V Slot 0.565m
2 20x40 V Slot 0.7m (Some triming required)

Build Instructions:
NA
Blog:
11/24/2013 - I have made three variations of the model as noted last week. The parts list is a start of whats needed to build any one of the three variations so there is extra here and there of things that might be needed. Also as this is a prototype there is extra built in and the list is not currently complete. I will try to create as many links to what I am actually ordering. Now will likely come a lull while I build up some cash to order and slightly tweak the initial design.

11/15/2013 - Initial posting of the Proteus sketchup file. Inside you will find three versions of the build. The difference you will see is with different methods of the Z axis. In short, I am worried about wobble in the tall moving gantry with this setup. I would like to use the belt in pinion throughout as it keeps things super neat and clean. but definitely don't like the extra weight on top. This may force threaded rods to be used. This build is still very much in the design/concept phase so things are still changing pretty radically.