Separate names with a comma.
Signup today and join in on the fun!
Short answer yes You will need a different Z axis motor mount. The OX has a Nema 17 If I had the cash I would be using the same setup ;)
Here is the prototype :) Since the code I'm going to try and use is proven I went ahead and made it so if all works I don't need to build it again ;)...
Consistent set points instead of guessing and having to turn the dial, With my last 555 timer you had to turn it slow till the three beep sounded...
For now I would like to make things work in the following manor, one of my relays will control power to the ESC "M8/M9" when enabled an attiny will...
All that's left for the stinger is spindle control ;) [ATTACH] [ATTACH]
Sweet!
I had problems until I did a proper star ground including a ground lead from my BOB I myself am trying to get away from parallel ports also, I'm sure...
Just get yourself a $12 PCIexpress parallel port card and spend the extra on hardware ;)
Do you think a PC817 would also work in place of the 4n35, may not be fast enough :/
I have all said parts needed to construct the circuit shown mind you it's a 85 not 45 but that really don't matter other then cost
Something that may help but I hit a language block after a few links http://digistump.com/board/index.php?topic=689.0
Ok I must have miss understood something as I thought mach3 put out a 0-10 anolog signal Now that I re-read things it's the G540 that puts out the...
I'm not sure but correct me if I'm wrong, how I see it since there are many different input voltage ranges I think a voltage divider circuit before...
Not sure if I have any tiny13's left only 85's. Are you thinking of using the internal clock ? I have done some reading up but for a none programing...
Build it and they will come ;)
Ok well let me know if ya need any and I can post them for cents, think I have about 6 or so left
Attiny programmer made and ready to get this project running :) [ATTACH]
I would have to see the layout of the mounts to know if my mill would do the job. I believe I have enough 1/2 plate, I will have to check I'm making...
Your plates are done :) For anyone interested I do have a scratch and dig set, all cosmetic for a discounted price.... First come first serve folks...
Yes that is right! Forgot that part lol
