Separate names with a comma.
Signup today and join in on the fun!
The shim should be there. I didn't put one there and it had some rough movement of the bearings like you describe. So, I guess that is not the...
Did you put a 1mm shim (washer) between the bearings? Sounds like that might be the problem because I did the same thing when I assembled mine.
I am having the same issue with my V-Slot gantry plates. I just received them today, and quickly assembled a mock up slide, just to see how the...
In my experience with the one machine I have built, the microstepping has been completely reliable. I haven't had any missed steps. The current...
Sorry again for not getting the pictures up. I didn't realize that I had push the reply button after posting pictures.
[ATTACH] [ATTACH]
The system uses 12 tooth pulleys. I use stepper drivers capable of micro-stepping, and resolution isn't a problem at all. If there is any loss,...
I plan to make changes to the y rail on the gantry. I foresee a lot of flexing with just the single 20X80 v slot beam. I will probably do a solid...
It works the same way as the x and y axis. The only difference with the z is that the motor is fixed in the z direction and the z beam moves up and...
It definitely should run with a good dust collection system. I figure it will run better open, but yes significant buildup could lead to tolerance...
I haven't decided yet. It will probably be either Kickstarter or Indiegogo. When the time comes, I will let everyone know about it. I want as many...
This router uses a 15mm wide htd5 belt system on all axes. The larger belts should keep belt stretch to a minimum.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] I have designed a CNC router featuring a 3 axis V-Slot rail system. I plan to make a custom plate kit and full...
mike125 published a new build: I hope to have a working prototype built soon. Read more about this build...
Hey guys, I have designed my own V-Slot CNC router that I call the Cheetah 33254 (33" X 25" X 4"). I will be presenting it here soon!
