Separate names with a comma.
Signup today and join in on the fun!
ya i am looking for a smaller one as they are about half the weight but even then the RCmotor spindle with an ER11 collet chuck seems like a really...
Hi Guys, Just about to start putting togehter my first OX and wondering if I could get a recomendation as to the weight I can mount on the Z axis....
Or by feeding the 12v into the rambo from the reg it should then adjust the fan speed via PWM on the Rambo ?
Thanks for the idea @Tweakie and I was just about to head to the shop to pick some parts up but using a regulator would negate any fan speed...
So after adding a 6mm aluminum heat spreader to my rostock max I decided a BIG 18v psu would help me get it to temp faster.... Totally forgot that...
If they would fit onto 1/4inch stepper shafts can I call dibs on them? I have just sent you an email so you have my contacts
I might be able to get a set cnc cut to your dxf in nz and check sizing and any updates IF that helps?
I am keen for a set or two to be shipped down to nz!
crud... I didn't think about tip speed when I picked up my 10inch drop saw for making kit set parts.... Poo! OK so any one put a small blade on a...
interesting idea with the steel c section, I was actually looking at using a flitch beam as a simple way to add a bit of stiffness but the steel C is...
IMHO I would try everything BEFORE glue/epoxy. If you lay the rails on a good surface and clamp them down in two directions while bolting everything...
They butt together rail for big cnc all the time so surely we can do the same with Vslot.... It may result in a small bump in the motion at that...
I was guessing coolant would be over kill but I like going over board on projects..... I should also point out that I plan on making a few kits for...
Putting together my first order.... So many options!!
Thanks so much for that info!
Hi @kram242 thanks for that heads up... is the only Vslot plate the universal one? Would I have to fab my own smaller ones if I wanted a range like...
Hi Guys, This might be a total noob question but can I use the OpenRail Gantry plates to interface to Vslot?
nice cut, I will make sure to get some high tooth count blades as well. Do you think hooking up coolant/mist would help as well?
Hi Guys, Just about to order my first batch of Vslot and now thinking about also making sure I get the right tools to cut it. I am looking at...
