OSH Park
Profile for Frenchie
Shared projects
MSOP10 Adapter
by
Frenchie.
2
layer board of
0.55x0.45
inches
(14.07x11.53
mm).
Shared on
November 17th, 2013 07:03.
MSOP10-0.5mm to DIP10
MSOP8 Adapter
by
Frenchie.
2
layer board of
0.45x0.45
inches
(11.53x11.53
mm).
Shared on
November 17th, 2013 07:03.
MSOP8 to DIP8
HD44780 LCD Adapter
by
Frenchie.
2
layer board of
0.80x2.00
inches
(20.42x50.90
mm).
Shared on
October 26th, 2013 15:06.
Adapter designed to mount on the rear of a HD44780 LCD to enable easier connection of a ribbon cable.
18x1 header down to 7x2 for compatability with both regular and RGB backlit devices. If using with a standard 16 pin device, mount a 6x2 header and leave the leftmost pins (closest to JCF 2013 marking) disconnected.
Connects only D4-D7 so the LCD must be used in 4-bit mode.
AVR Based Transistor Tester
by
Frenchie.
2
layer board of
1.91x1.38
inches
(48.62x35.10
mm).
Shared on
October 26th, 2013 15:06.
Transistor & component tester. Based on designs from Markus Frejek, Karl-Heinz Kübbeler & Markus Reschke. http://www.mikrocontroller.net/articles/AVR_Transistortester
This version uses SMD parts and is designed to be directly soldered on the back of a 16 pin HD44780 LCD using a 0.1" pin header. Minor modification to the Reference (I used what I had to hand). Schematic is available at http://www.frenchie.id.au/electronics/ttester/schematic.pdf