OSH Park
Profile for GertSanders
Shared projects
RaspNRF24-V2.brd
by
GertSanders.
2
layer board of
1.40x0.75
inches
(35.59x19.05
mm).
Shared on
April 13th, 2017 15:47.
RaspNRF24-V2, tested to work. C1 is 100uF C2 is 10uF C3 is 100nF IC1 is ASM1117 3.3V The NRF24L01 is a module with ceramic antenna. This sits on the top side. The IRQ pin is connected to PIN18 on the Raspberry header. The two row header starts at pin 1 (where JP1 is written) and sits on the bottom side. Fits inside most Raspberry2 cases.
Low Power Node SMD v1 (CR1632 battery)
by
GertSanders.
2
layer board of
0.80x0.90
inches
(20.32x22.89
mm).
Shared on
March 27th, 2016 21:46.
Untested
Low Power Node SMD v1 (atmega328p and nrf24l01+)
by
GertSanders.
2
layer board of
0.80x0.90
inches
(20.32x22.89
mm).
Shared on
March 27th, 2016 21:43.
Works nicely
Low Power Node PTH v3 (atmega328p and smd NRF24L01+)
by
GertSanders.
2
layer board of
1.94x0.95
inches
(49.30x24.00
mm).
Shared on
March 16th, 2016 11:54.
Tested
NRF24L01+ BB adapter
by
GertSanders.
2
layer board of
0.62x0.55
inches
(15.85x13.84
mm).
Shared on
March 12th, 2016 15:36.
NRF24L01+ Breadboard adapter - untested