OSH Park
Profile for caitsith2
Shared projects
Hardware SPC Player
by
caitsith2.
2
layer board of
4.35x2.14
inches
(110.49x54.38
mm).
Shared on
March 15th, 2016 08:56.
APU Mega Shield v1.03
by
caitsith2.
2
layer board of
4.25x2.14
inches
(107.95x54.38
mm).
Shared on
December 18th, 2015 07:15.
SNES APU Mega shield using components taken from either an APU module or a revision 2 SNES. Source files over at https://github.com/emukidid/SNES_APU_SD
Integrated APU Mega Shield
by
caitsith2.
2
layer board of
4.25x2.14
inches
(107.95x54.38
mm).
Shared on
December 15th, 2015 04:57.
SNES APU Mega shield using components desoldered from either an APU module or a revision 2 SNES.
Source files over at https://github.com/emukidid/SNES_APU_SD
APU module
by
caitsith2.
2
layer board of
2.85x2.45
inches
(72.42x62.23
mm).
Shared on
November 16th, 2015 06:44.
A way to take the APU components from a revision 2 SNES and make a module of them that can be used for external interfacing with a PC.
UNRom 512+
by
caitsith2.
2
layer board of
3.94x2.99
inches
(100.08x75.95
mm).
Shared on
October 23rd, 2013 16:21.
The board has the following capabilities:
- 512K PRG rom
- 32K CHR Ram
- self-flashing (no need for a battery)
- On the fly mirroring mode change
- Horizontal
- Vertical
- One-Screen
The original version of the board, as seen in Battle Kid 2, and other upcoming games, does not have full on the fly mirroring change, just partial, if the One-screen mirroring jumper is soldered. This one does away with the mirroring jumpers altogether.
Also, the board can be mounted with either Ciclone, a closed source cic chip, or with AVRCICzz, an open source cic chip.
(Really wish OSH Park would allow me to upload the Schematics along side the board file, inside of a zip file.) The matching schematics can be downloaded here