marquee / teensy3 FET driver

by icenyne.
Top
Bottom

2 layer board of 1.56x1.18 inches (39.62x29.97 mm).
Shared on September 2nd, 2016 18:25.

Driver board for Teensy3 with 6 high current and 7 low current FETs. On-board regulator powers Teensy from 12V.

(Error: JP2 was connected to ground instead of +12V… positive side of load needs to be connected elsewhere…)

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project