8-SOIC/EP Breakout Board

by Eric.
Top
Bottom

2 layer board of 0.51x0.41 inches (12.88x10.34 mm).
Shared on January 15th, 2014 18:06.

Cost: $1.00 for three.

Description:

Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.

Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provided, with thermal vias to bottom side copper pour and unmasked copper on bottom side to aid soldering.

The lower-middle through-hole pad is connected to the IC exposed pad; solder a wire in this hole and jumper to appropriate IC pin.

Pins numbered on top side for quick reference and silk screen area on reverse to write part number, pin annotations, etc.

This is intended as a breadboard testing aid only. It will not provide adequate heatsinking to reach datasheet thermal limits, so don’t turn the wick up all the way!

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project