OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

Super rigid Delta printer, using 20X40 V-Slot

Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)

I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.

This is the story of me building myOX - my version of the "ideal" OX. I wanted a machine which could work piece at least 4' wide, as long as I could feed through (don't be shy, think "infinity") AND go deep on multiple faces - a manual 4th axis to carve, say, molds for thermoforming polycarbonate shells. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell and I will update this build as I go along, probably creating a few other builds along the way ...

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux

Variant on the OpenBuilds OX CNC Router, enlarged with 1500mm length beams for a cutting area of 48" x 48". Based on the original model, the larger of the two, with the addition of a third 20x60 beam on the gantry for strength. Estimated cost is around $1100, minus the router.

My first Build with V-slot

A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.