OSH Park
Shared projects
- You need to sign in or sign up before continuing.
SD Connector 2041021-4 Breakout v1.0
by
Jenner.
2
layer board of
1.76x1.16
inches
(44.63x29.39
mm).
Shared on
March 7th, 2017 22:50.
Breadboard-compatible breakout for a full size SD card (or microSD card adapter).
The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.
The Basic Breakouts Github repo has the design files and parts list.
This project is released under the Open Hardware License v1.2.
Simple AVR Programmer v1.1
by
Jenner.
2
layer board of
1.61x0.66
inches
(40.79x16.69
mm).
Shared on
March 7th, 2017 22:49.
Simple Atmega328-based AVR programmer with ISP and FTDI breakout. I use this with Nick Gammon’s Arduino Progarmmer sketch to put the bootloader on other AVR chips.
The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.
To put the bootloader on this board, set the switch to ‘Target’.
To use this board to put the bootloader on a target board, set the switch to ‘Prog’.
The Github repo has the design and parts list.
This project is released under the Open Hardware License v1.2.
JOHN5: Encoders on MXP
by
codetheweb.
2
layer board of
1.80x1.31
inches
(45.75x33.32
mm).
Shared on
March 7th, 2017 22:40.
A passive board to help with connecting encoders to the roboRIO.
FC250 Impedance Test v2.0
by
Edison517.
2
layer board of
0.77x0.33
inches
(19.56x8.25
mm).
Shared on
March 7th, 2017 20:37.
CW308T-87C51 (UFO Target: 87C51)
by
coflynn.
2
layer board of
2.20x3.34
inches
(55.78x84.76
mm).
Shared on
March 7th, 2017 17:01.
ChipWhisperer CW308 Target: 87C51 in PLCC (rev -02). See https://wiki.newae.com/CW308T-87C51 for documentation.