OSH Park
Shared projects
- You need to sign in or sign up before continuing.
gruvin9x.kicad_pcb
by
gruvin.
2
layer board of
6.65x2.17
inches
(169.01x55.02
mm).
Shared on
November 24th, 2016 07:04.
G9X v4.2d
CounterBoard 1.1
by
Hustin13.
2
layer board of
2.54x1.35
inches
(64.47x34.29
mm).
Shared on
November 24th, 2016 06:31.
Stackable counter board, either 5V or 12V input, and choice of 2 outputs
RXADC v0.1
by
emeb.
2
layer board of
2.01x1.61
inches
(51.05x40.89
mm).
Shared on
November 23rd, 2016 20:27.
RX ADC for Digilent PMOD interface. For more information see the following site:
LP Mini
by
MaxMKA.
2
layer board of
0.71x1.51
inches
(18.06x38.38
mm).
Shared on
November 23rd, 2016 19:35.
The LP Mini is an Arduino Pro Mini compatible development board for low power applications. Besides using a less power-hungry voltage regulator, it features a real time clock for waking up its ATmega328 and a mosfet to turn external devices on and off. With a sleep current of only 2.8 µA, the LP Mini is ideal for data logging over extended periods of time.
Hackaday.io: https://hackaday.io/project/16724-lp-mini
rj11 jst xh
by
trimarco232.
2
layer board of
1.00x0.57
inches
(25.50x14.50
mm).
Shared on
November 23rd, 2016 19:18.
connects a rj11 6p4c socket to a 4 wire jst xh female header. The pins of the jst header are not through hole, but they must be soldered flat on the board : so the flat ribbon cable on the rj11 side and the wires on the jst side are lined up