OSH Park
Shared projects
AM BCB Filter.
by
DCorwin822.
2
layer board of
0.98x0.32
inches
(24.99x8.03
mm).
Shared on
November 22nd, 2016 15:17.
BOM: http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=39c0f0eaa2
Here’s where I got the original design and the schematic. http://swling.com/blog/2016/02/a-simple-homebrew-high-pass-filter/
microsd-Adapter-2row_Gerber.zip
by
Kurts-Robot.
2
layer board of
0.77x0.44
inches
(19.46x11.20
mm).
Shared on
November 22nd, 2016 14:30.
Teensy 3.5/6 Micro SD adapter V0.2
Warning make sure to order with the .8mm width option.
Full size SD card to Micro SD
by
PaulStoffregen.
2
layer board of
1.80x1.24
inches
(45.77x31.50
mm).
Shared on
November 22nd, 2016 11:50.
Why bother using huge standard size SD cards with a small Micro SD socket? Mostly for testing the SD library compatibility ancient SD cards (which are mostly the large size) on Teensy 3.5 & 3.6.
Who knows, maybe someone else will find this useful for some off-beat application?
The SD socket is Digikey part number HR845CT-ND.
Swedish Vaper PotBelly BackPack v3
by
SwedishVaper.
2
layer board of
0.53x0.53
inches
(13.49x13.49
mm).
Shared on
November 22nd, 2016 11:14.
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
NOTE: make sure resistor does not short against p-fet on PotBelly board.
Any previous projects that are now deleted are used at your own risk.)
Parts required:
1 x 1K ohm 0603 resistor 1 x PSMN1R5-30YLC n-fet (lfpak)
Designed as an add-on to the Swedish Vaper PotBelly v1, v2 & v3, but can be used as a standalone fet-board.
Swedish Vaper PWM 555 PotBelly v3
by
SwedishVaper.
2
layer board of
0.53x0.53
inches
(13.49x13.49
mm).
Shared on
November 22nd, 2016 11:05.
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
Any previous projects that are now deleted are used at your own risk.)
This is a PWM board with NO reverse polarity protection.
This is a buffered circuit, good for up to 4S.
Recommended potentiometer value: 50K
Pot is mounted on the side with the timer IC.
Parts list:
1 x 0603 15K resistor
1 x 0603 0.1uF capacitor
1 x 0603 0.01uF capacitor
1 x BAT54S dual diode (SOT23 package)
1 x SOT23 pfet
1 x SOIC-8 555 timer IC
1 x 3-pin through hole potentiometer, 50K Model 93 recommended