OSH Park
Profile for grips03
Shared projects
genesis-to-7800-adapter-rev5-widebody-round5.brd
by
grips03.
2
layer board of
1.02x0.38
inches
(25.98x9.60
mm).
Shared on
February 16th, 2017 16:07.
Sega Genesis to Atari 7800 controller adapter, aka Revenge adapter.
Please don’t make to sell on eBay, etc. This is for non-commercial use only.
Digikey.com :
(1) db9 shell p/n 970-009-010R011
(1) db9 male p/n A-DS 09 PP/Z
(1) transistor p/n CMXT3906 TR
(2) 620 ohm 1206 resistor p/n ERJ-8ENF6200V
(2) 1k ohm 1206 resistor p/n ERJ-8ENF1001V
Console5.com :
Sega Genesis controller extension cable
odyssey2-composite-rev2.brd
by
grips03.
2
layer board of
1.02x0.91
inches
(25.91x23.04
mm).
Shared on
February 5th, 2017 23:28.
PCB to add Composite Video to Odyssey 2 console.
Please don’t make to sell on eBay, etc. This is for non-commercial use only.
Parts list:
CT6EP102 (1K pot)
BC558B
BC548C
680 ohm .25 watt resistor
220 ohm .25 watt resistor
100nf cap
You adjust 1K POT on this PCB and R4 (on the O2 system board) until you are happy with output. Default setting is 400ohms.
Video in = junction of C44 and R7 on system board GND = Ground +5v = easy enough to find with multimeter Audio in = junction of C45 and R49 on system board
Put RCA jacks on the lower left hand side of the bottom shell. This way they are out of way of system board and voice module.
odyssey2-composite-rev1.brd
by
grips03.
2
layer board of
0.86x0.57
inches
(21.84x14.43
mm).
Shared on
February 3rd, 2017 00:41.
PCB to add Composite Video to Odyssey 2 console.
Please don’t make to sell on eBay, etc. This is for non-commercial use only.
Parts list:
CT6EP102 (1K pot)
BC558B
BC548C
680 ohm .25 watt resistor
220 ohm .25 watt resistor
100nf cap
You adjust 1K POT on this PCB and R4 (on the O2 system board) until you are happy with output. Default setting is 400ohms.
Video in = junction of C44 and R7 on system board GND = Ground +5v = easy enough to find with multimeter Audio in = junction of C45 and R49 on system board
Put RCA jacks on the lower left hand side of the bottom shell. This way they are out of way of system board and voice module.
Intv Video Intvwiki Rev1
by
grips03.
2
layer board of
1.73x1.29
inches
(43.99x32.69
mm).
Shared on
February 25th, 2016 18:01.
Please don’t make to sell on eBay, etc. This is for non-commercial use only.