This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform

While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)

Super rigid Delta printer, using 20X40 V-Slot

Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.

Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.

A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.

This is a PCB designed to control a laser Engraver CNC

I hope to have a working prototype built soon.

This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.

The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.

I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.

This is the story of me building myOX - my version of the "ideal" OX. I wanted a machine which could work piece at least 4' wide, as long as I could feed through (don't be shy, think "infinity") AND go deep on multiple faces - a manual 4th axis to carve, say, molds for thermoforming polycarbonate shells. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell and I will update this build as I go along, probably creating a few other builds along the way ...

We are looking for BETA customers.

Design of a multifunctional CNC machine.

A quick and simple saw stop build.

This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux