A few weeks ago I wrote about making some good looking front panels for your electronic projects…
Since then I have found an even better way of making instrument panels look super professional.
The process is very simple.
- Start with spray-painting high temperature spray paint on a piece of clear perspex or for that matter any color you want.
- Laser edge your Panel designs on the painted side of the perspex. The Edging will remove the paint and frost the perspex softening the back light.
For more details, have a look at the original post by Eric Forkosh from narobo.com.
Related Posts
Making professional looking front panels for your electronics projects.
Build a Laser Cutter from old PC parts.
Funky ATX 24-Pin plugs for your PCB projects
KiCad – Creating Gerber Files
Can-Bus Breakout (Picking Can Bus over RS485)
Ladyada (Limor Fried) talks to President Obama about patent reform![The Economics Of Selling Your Hardware Project – EEVBLOG [Reblogged]](../../i0.wp.com/blog.protoneer.co.nz/wp-content/uploads/2014/05/EEVblogea9f.jpg?resize=150%2C150)
The Economics Of Selling Your Hardware Project – EEVBLOG [Reblogged]
Raspberry Pi – Useful Commands
